|
-Intelligent
CAN Interface for 5V and 3.3V PCI Bus Systems with optional Low Speed
bus interface
 |
The
iPC-I XC16/PCI represents a very powerful and economic solution
for an active CAN board with two CAN channels, covering a wide range
of industrial and automotive CAN applications. The interface is
state-of-the-art, supports PCI and can be easily installed by Plug
& Play. Some of the features offered by the on-board microcontroller
include filtering,preprocessing,transmission and time stamped storage
of the CAN messages.
Due to the powerful microcontroller both CAN controllers can operate
simulta- neously without losing any data, even in systems with a
high bus load. In combination with the CAN driver (VCI), the iPC-I
XC16/PCI allows an easy integration of PC supported CAN applications.
In addition the iPC-I XC16/PCI is well suited for use with the IXXAT
analysis and configuration tools, as well as for use as a CANopen
network controller.
|
Technical
Data
| PC
bus interface |
PCI
Bus (Specification 2.2), 32 bit/33MHz, 5 Volt or 3.3 Volt |
| PC
address range |
Plug
& Play, 16 kBytes memory and 128 bytes I/O area |
| Interrupts |
INT
A, Plug & Play |
| Microcontroller |
Infineon
XC161, clocked with 40 MHz |
| Memory
extension |
512
kByte SRAM, 128 kByte FLASH, 8 kByte DPRAM |
| CAN
controller |
Internal
TwinCAN module (two CAN channels) |
| CAN
bus interface |
ISO/IS
11898-2 according to DS102, Sub D9 connectors, optional galvanic decoupled
and high-/low-speed bus interface switchable via software |
| Temperature
range |
-20C -- +70C |
| Power
Supply |
5V
DC, 300 mA typ., 3.3V DC, 120mA typ. |
| Size |
approx.
89 x 124 mm |
|
